Sennebogen Certified Used Machines include: 12-Month/2,000 Hour Drivetrain & Hydraulic Warranty.

This used Certified Used Sennebogen 830 wheeled material handler has a K17 stick/boom with a reach of 55’9″ and weighs 84,000 pounds.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

This machine is located in South Carolina. Contact us for a machine and freight quote.

CUMMINS Engine B6.7 FR95885, emissions according to (EU) Stage V / US EPA Tier 4 final, 168 kW / 2,200rpm. Water-cooled, including electrically heated water separator with fuel prefilter 24V and pre-cleaner for air filter

Diesel particulate filter (DPF)

Automatic idle speed stop for diesel engine

Eco-mode for diesel engine

SENNEBOGEN MAXCAB – cab with sliding door

Heating- Climate automatic with central control elements

SENNEBOGEN control & diagnostic system SENCON

Counter rotation of ventilator for cleaning the cooler

Automatic central lubrication for equipment

Pinion lubrication for slewing ring

Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 halogen lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area

Camera system – base package with 2 cameras includes 1 color monitor 7″, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine

Emergency control function to ensure machine availability for limited operations by bridging the main functions

Tool kit

Wheeled undercarriage MP30 for diesel machines with 4-point-stabilizers, all-wheel-drive and two-stage powershift transmission.

Warning and Safety signs according to ISO standard

Solid rubber tires 12.00-20 (8 units) with intermediate ring for MP30

Joystick-steering (only wheeled machines)

Drive pedals like Trailer machine (1-way action) instead of standard pedal. Travel direction switch on the Joystick (only wheeled machines with MAXCAB)

Outrigger pads 525x414mm, only for MP30, MP31, MP34-HDS, MP35-HDS, MP36, MP38-T, and MP41 undercarriage

Cab elevation E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics

SENNEBOGEN MAXCAB industry with sliding door incl. Sliding window and undivided, straight windscreen in bullet proof glass, fixed glazing. Roof extended to front, roof window in bullet proof glass, wiper/washer system for front window, lower front window with wiper/washer system, wiper for skylight, resiliently mounted, Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof, automatic air condition with fresh air and circulation air filters.

Air suspended operator’s seat with lumbar support, seat heating and headrest for driver´s seat

2 inch seat belt – standard

Sun protection for skylight, inside, only for MAXCAB industry

Sun protection for front windscreen, inside, only for MAXCAB industry

Radio with USB port, MP3 and Bluetooth

Grated step on side of cab with hand rail (bolted), only for MAXCAB

Standard lubricants for operation range between -20°C and +40°C, for diesel machines Information: hydraulic oil type needs to be defined separately

Hydraulic oil Shell Tellus S2 VA 46

SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil purity and extended oil service life), equipment recommended especially when biodegradable oil is used

Standard material handler boom type K17 consisting of: compact boom 9.8m straight and grab handling stick 7.5m curved with special materials handling kinematics, boom and stick cylinders featuring end position damping, safety check valves for boom and stick cylinder.

End position shut off for boom up/down and stick in/out function.

Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating

Pressure indicator (boom cylinder) with Barograph display in the SENCON and acoustical warning, deactivation possible.

1 LED headlight mounted on the cab roof heading backwards
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side
1 LED headlight mounted on the compact boom down side

SENtrack telematics system

North American specs not currently on the machine (contact us about adding):

20kW Generator
Bullet Proof Glass
Top & Front Guards
Undercarriage protection
Upper carriage handrails
Cab Catwalk
Travel Alarm

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine