SENNEBOGEN
- Used
- 6366
- 84,000 Lbs
- K17 - 55'9"
- CUMMINS Engine B6.7, 129 kW / 2,200, Tier 4 Final
- 830.0.2957
- Eye level up to 19′
- Sold
DESCRIPTION
This used Sennebogen 830 wheeled material handler has a K17 stick/boom with a reach of 55’9″ and was purpose-built for scrap metal recycling applications. From ferrous to non-ferrous metals, this used 830 excels in handling a diverse range of scrap recycling materials.
When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE
This machine is located in South Carolina. Contact us for a machine and freight quote.
DETAILED SPECS
CUMMINS Engine B6.7 C225, 186kW/ 2,000 rpm, exhaust emissions according to US EPA Tier 4 final, water-cooled including electrically heated water separator with fuel prefilter 24V and pre-cleaner for air filter. Automatic idle speed stop for diesel engine. Eco-mode for diesel engine
SENNEBOGEN MAXCAB E270 infinitely adjustable up to 2.7m via hydraulic cab with sliding door with sliding window, resiliently mounted, tinted safety glass, tiltable front window, skylight, wiper/washer system for front window. Front bullet proof glass version, fixed glazing for operator’s cab
Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof.
Air suspended operator’s seat with support for intervertebral disc, seat heating and headrest for driver´s seat with 2-inch seat belt.
Heating- Climate automatic with central control elements
SENNEBOGEN control & diagnostic system SENCON
Counter rotation of ventilator for cleaning the cooler
Automatic central lubrication for equipment
Pinion lubrication for slewing ring
Lighting system 1:2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 halogen lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area.
Camera system – base package with 2 cameras includes 1 color monitor 7″, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine
Emergency control function to ensure machine availability for limited operations by bridging the main functions
Tool kit
Wheeled undercarriage MP30E for diesel machines with 4-point-stabilizers, all-wheel-drive and two-stage powershift transmission, outrigger pads 525x414mm, only for MP30 and MP41 undercarriage
Solid rubber tires 12.00-20 (8 units) with intermediate ring for MP30E
Joystick-steering
FOPS guard for roof (tier 2), for MAXCAB, MAXCAB industry, MULTICAB
Windscreen guard for front window, MAXCAB standard
Sun protection for skylight, inside, only for MAXCAB
Sun protection for front windscreen, inside, only for MAXCAB
Grated step on side of cab with hand rail (bolted), only for MAXCAB
Hand rail at the upper structure, tiltable for transportation, diesel engine
Standard lubricants for operation range between -20°C and +40°C, for diesel machines Information: hydraulic oil type needs to be defined separately
Hydraulic oil Shell Tellus S2 VA 46
SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil purity and extended oil service life), equipment recommended especially when biodegradable oil is used
Standard materials handling boom type K17 consisting of: compact boom 9.8m straight and grab handling stick 7.5m curved with special materials handling kinematics, boom and stick cylinders featuring end position damping, safety check valves for boom and stick cylinder.
End position shut off for boom up/down and stick in/out function.
Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side
1 LED headlight mounted on the compact boom down side
1 LED headlight mounted on the compact boom upper side
1 LED headlight mounted on the cab roof heading forwards
One rotating beacon at the cab
North American specs that will be added prior to shipment
20kW Baldor Hubble Genset
Front and skylight guards
Under carriage protection
Upper carriage handrails
Cab Catwalk
Travel Alarm
Ball Valves at end of stick
Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine
AFTER-SALES SUPPORT
All of our Used machines receive the same level of after-sell support as our new machines.
Customer Direct
We work directly with you when it comes to selling our machines and providing after-sell support. No other manufacturer gives you direct access
Minimize Downtime
Uptime is priority No. 1 at SENNEBOGEN and we have developed specialized programs and services to keep you up & running smoothly.
SERVICE NETWORK
SENNEBOGEN has built the industry’s largest network for factory-trained technicians, offering you more choices to ensure the best possible support for your SENNEBOGEN, throughout the life of the machine.
Uptime Kits
SENNEBOGEN is the only manufacturer on the market that has specific kits to provide quick resolution for minor issues that can cause a machine to go down
Preventive Maintenance Kits
Parts Inventory
We have $50M in parts inventory in Stanley, NC with a 95% order fill-rate. When we run into a situation where we do not have a part in-stock we will air-freight it from Germany.
24-Hour “on call” parts service
We have a 24-hour “on call” parts service which you can call if a machine is down, and you need a part asap. Our “on call” parts rep will arrange for a hotshot truck to arrive at our warehouse and ensure the part is in route asap. (Call parts @ 704-347-4911).
