Sennebogen Certified Used Machines include: 12-Month/2,000 Hour Structural & Hydraulic Warranty.

This used 825R-HD tracked material handler weighs 76,000 Lbs and is configured w/ a K14 ULM stick/boom combination giving it a reach of 41′. It’s ULM stick makes it an ideal machine for demolition, waste & recycling applications. It is equipped w/ a Cummins B6.7 engine and hydraulic over hydraulic controls. No proprietary software needed to work on this machine.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

This machine is located in South Carolina. Contact us for a machine and freight quote.

CUMMINS Engine B6.7 FR95889, emissions according to (EU) 2016/1628 Stage V / US EPA Tier 4 final, 129 kW / 2200 min Maximum power: 145 kW /2000 min. Water cooled, including electrically heated water separator with fuel prefilter 24V and pre-cleaner for air filter, Diesel particulate filter (DPF), Automatic idle speed stop for diesel engine, Eco-mode for diesel engine, Heating- Climate automatic with central control elements, Counter rotation of ventilator for cleaning the cooler, Automatic central lubrication for equipment and slewing ring raceway

B60 track (58 track shoes) with 700mm triple-bar track shoes, canted for T31/350. Crawler telescopic undercarriage type T31/350, for diesel machines, with hydraulically adjustable gauge from 2.3m – 3.5m and B60 crawlers. 2 additional pcs. of track guides on each side

K14 ULM: Compact boom 8.5m straight and special grab handling stick 5.5m straight with ULM reversing mechanism
End position shut off for stick in function, safety check valves for boom and stick cylinders. NOTE: Special grab handling stick for quick coupler mounting

ULM hydraulics for bucket cylinder operation including Tool Control and activation valves for shear and hammer operation on ULM stick consisting of: Standard hydraulics for operation of various working tools additional hydraulic valve and additional piping for operation
of the bucket cylinder ULM, appropriate for attachments e.g. sorting grab. Tool Control – programmable for operation of various working tools with different oil flows and pressure setting. Activation valve for the operation of a shear. Activation valve for the operation of a hammer. Leakage oil line to the stick end appropriate for various attachments incl. shear, hammer, vibrator.

Cab elevation E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics, 30° tiltable. SENNEBOGEN MAXCAB operator’s cab with sliding door incl. sliding window, resiliently mounted, tinted safety glass, tiltable front window, skylight, wiper/washer system for front window, Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof, automatic air condition with fresh air and circulation air filters.

Galvanized metal sheets covering below MAXCAB lift cabin instead of standard covering

Protection case for air filter

Air suspended operator’s seat with lumbar support, seat heating and headrest for driver´s seat
Windscreen wiper for skylight with washer system. Windscreen wiper for lower cabin front window with washer system only for MAXCAB operator’s cab. FOPS guard for roof (tier 2), for MAXCAB, MAXCAB industry, MULTICAB, painted in RAL 9005, black ATTENTION: FOPS guard will be mounted on undercarriage to stay within the required transport height if necessary. Windscreen guard for front window, MAXCAB standard, painted in RAL 9005, black. Sun protection for skylight, inside, only for MAXCAB. Sun protection for front windscreen, inside, only for MAXCAB. Cab front windscreen in bullet proof glass version, fixed glazing, for MAXCAB operator’s cab. Skylight of bullet proof glass, fixed glazing, for MAXCAB operator’s cab. Radio with USB port, MP3 and Bluetooth. Positioning swing break via foot pedal. Grated step on side of cab with hand rail (bolted)

Standard lubricants for operation range between -20°C and +40°C, for diesel machines. Information: hydraulic oil type needs to be defined separately. Hydraulic oil Shell Tellus S2 VA 46

Diesel-refueling pump 50 l/min with filling level cut-off

Cyclone air pre-cleaner for operations with high exposure to dust (additional to standard air pre-cleaner), external position for easy maintenance access.

SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil purity and extended oil service life), equipment recommended especially when biodegradable oil is used

Jump start connection

Blind plugs instead of standard quick change couplers for grab open/close and grab rotating

Grab rotation valve with increased liter capacity 60l/min

LED headlight mounted on the cab roof heading backwards
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side
1 LED headlight mounted on the compact boom down side
1 LED headlight mounted on the compact boom upper side
1 LED headlight mounted on the cab roof heading forwards
2 LED headlights mounted on the sides of the upper-carriage: 1 pc on left side, 1 pc on right side
1 LED headlight mounted on the counterweight heading backwards

3-inch seat belt for seat instead of standard seat belt
Brackets for fire extinguisher according to North American standards in the cab

SENtrack telematics system

North American Specs not currently on the machine, contact us if you would like to add
GenSet
Front protection guard
Cab catwalk
Under carriage protection

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine