This used 825M E-Series purpose built material handler is configured w/ a K13 stick/boom combination and has a reach of 43’4″. It is equipped w/ a Cummins B6.7 engine and hydraulic over hydraulic controls. No proprietary software needed to work on this machine.

The Sennebogen 825 weighs in at 57,000 pounds, has a lift capacity up to 30,000 pounds, and reach up to 43 feet to efficiently move and sort scrap materials with ease. Explore its advanced hydraulics and innovative design that contribute to unmatched material handling capabilities. From ferrous to non-ferrous metals, this used material handler excels in handling a diverse range of scrap recycling materials.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

The machine is located in SC. Contact us for a machine and freight quote.

CUMMINS Engine B6.7 – C173, 129kW/ 2,200rpm,exhaust emissions according to Regulation (EU) 2016/1628 Stage V / US EPA Tier 4 final, water-cooled including electrically heated water separator with fuel prefilter 24V and pre-cleaner for air filter. Diesel particulate filter (DPF). Automatic idle speed stop for diesel engine. Eco-mode for diesel engine

Heating- Climate automatic with central control elements

SENNEBOGEN control & diagnostic system SENCON

Counter rotation of ventilator for cleaning the cooler

Automatic central lubrication for equipment and slewing ring raceway

Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area

Camera system – base package with 2 cameras includes 1 color monitor 7″, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine

Emergency control function to ensure machine availability for limited operations by bridging the main functions

Wheeled undercarriage MP26E for diesel machines with 4-point-stabilizers, all-wheel-drive and two-stage powershift transmission.

Solid rubber tires, 10.00-20 (8 units) with intermediate ring

Warning and Safety signs according to ISO standard

Joystick-steering (only wheeled machines)

Outrigger pads 425 x 380mm. Only for MP21, MP26 and MP33 undercarriage

Cab elevation E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics

SENNEBOGEN MAXCAB operator’s cab with sliding door incl. sliding window, resiliently mounted, tinted safety glass, tiltable front window, skylight, wiper/washer system for front window, Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof, automatic air condition with fresh air and circulation air filters.

Air suspended operator’s seat with lumbar support, seat heating and headrest for driver´s seat. Multi-functional armrest for driver’s seat. Ergonomically adjustable armrest, versatile adjustable for every situation and physique (height-adjustable, swiveling sidewise, angle-adjustable, armrest slidable) instead of standard armrest

2 inch seat belt

Windscreen wiper for skylight with washer system

Windscreen wiper for lower cabin front window with washer system only for MAXCAB operator’s cab

Sun protection for skylight, inside, only for MAXCAB

Sun protection for front windscreen, inside, only for MAXCAB

Radio with USB port, MP3 and Bluetooth

Hand fire extinguisher, type PD6 (1 piece)

Standard lubricants for operation range between -20°C and +40°C, for diesel machine.

Hydraulic oil Shell Tellus S2 VA 46

SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil purity and extended oil service life), equipment recommended especially when biodegradable oil is used

K13 consisting of: straight compact boom 7.5m straight and grab handling stick 5.8m curved with special materials handling kinematics, boom and stick cylinders featuring end position damping. End position shut off for stick in/out function, safety check valves for boom and stick cylinders. Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating. Boom damping system

Camera system – add-on camera (1 piece), variable positioning via magnetic base. Mounting position: 1 LED headlight mounted on the cab roof heading backwards, 2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side, 1 LED headlight mounted on the compact boom down side, 1 LED headlight mounted on the cab roof heading forwards

North American specs that will be added prior to shipment

Front and skylight guards
Under carriage protection
Upper carriage handrails
Cab Catwalk
Travel Alarm
Ball Valves at end of stick

Contact Us if you would like to add a GenSet.

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine