This used 821M wheeled material handler is configured w/ a 15kW generator & K12 boom/stick combination.

The Sennebogen 821 weighs in at 52,800 pounds has a reach of 36′ and lift capacity up to 16,000 pounds to efficiently move and sort scrap materials with ease. From ferrous to non-ferrous metals, this used Sennebogen material handler excels in handling a diverse range of scrap recycling materials. It’s Tier 3 Cummins engine eliminates the need for DEF and is also a great option for Latin American yards.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industries largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

The machine is located in South Carolina. Contact us for a machine and freight quote.

• SENNEBOGEN MAXCAB Industry Cab

• Generator system SENNEBOGEN 15kW, 230V, 100% duty cycle: 4-pole generator, hydraulically driven, can be switched off for non-use without hydraulic dissipation, operating and display unit in cabin (for proper matching please check specify performance ratings of existing magnet plates)

• Wheeled undercarriage MP21E with 4-point-stabilizers PAH4, strong 36 t special axles and strong all-wheel-travel drive
with two-stage powershift transmission. Attention: In combination with electric motor a 1-axle-travel drive is integrated
instead of the all-wheel-travel drive

• 1 hand fire extinguisher, type PD6

• SENNEBOGEN control & diagnostic system SENCON

• Radio with CD-Player

• Ergonomically adjustable armrest, versatile adjustable for every situation and physique (height-adjustable, swivelling
sidewise, angle-adjustable, armrest slidable) instead of standard armrest

• Air filter pre-cleaner, precleans approx. 98% of abrasive smut to increased life span of air filter

• Cab elevation type E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics

• Joystick-steering

• Lighting system 4 LED cab: 1 pc. LED headlight mounted on the cab roof right side heading backwards (in addition to system 1,2 or 3)

• Automatic idle speed stop for diesel engine

• Roof window in bullet proof glass, 20mm thickness, lower front window with wiper/washer system, wiper for skylight,
door window as sliding window.

• Front window (approx. 320 x 270mm) of bullet proof glass (only in combination with Joystick-steering for mobile
machine and respectively

• Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating

• Sun protection for skylight

• Adjustable air vents for optimum work environment

• Protection guards for skylight, safety glazing etc.) when hazards can occur by stones/parts flying around or falling down
from above etc.

• Camera system – base package with 2 cameras includes 1 color monitor 7´´, monitor with 4-way split, up to 4 cameras
expandable, 2 cameras with 115° field viewing angle for: Rear view camera Right side of the machine

• Solid rubber tires, 10.00-20 (8 units) with intermediate ring

• Straight compact boom 7.0m straight and grab handling stick 4.9m curved with special materials handling kinematics,
boom and stick cylinders featuring end position damping. End position shut off for stick in function, safety check valves for boom and stick cylinders

• Air suspended operator´s seat with support for intervertebral disc, seat heating, safety belt and headrest for driver´s seat

• Sun protection for front windscreen

• 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 halogen
lights integrated in the left front side of the cab roof. H3 service headlights 70W 1 pc. at motor side and 1 pc. at cab side
mounted.

Automatic central lubrication for equipment and slewing ring raceway

• Counter rotation of cooler ventilator to blow out cooler

• Eco-mode for diesel engine

• 1 pc. LED headlight mounted on the compact boom down side and 2 pcs. LED headlights mounted on both sides of the stick in upper
position (in addition to system 1 or 2)

• Grated step on side of cab with hand rail (bolted)

• Water separator with fuel prefilter 24V. Attention: surcharge for standard engine in 97kW edition with emissions according to US EPA
Tier 3/EU stage IIIa

North American specs not currently on the machine, contact us about adding.

• Top and front guards
• Under carriage protection
• Upper carriage handrails
• Catwalk beside the cab
• Jump start connection

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine