The Sennebogen 821 weighs in at 52,800 pounds has a reach of 36′ and lift capacity up to 16,000 pounds to efficiently move and sort scrap materials with ease. From ferrous to non-ferrous metals, this used Sennebogen material handler excels in handling a diverse range of scrap recycling materials.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

The machine is located in South Carolina. Contact us for a machine and freight quote.

CUMMINS Engine QSB 4.5 – C140, 104kW/2200 rpm, emissions according to US EPA Tier 4 final/EU stage IV, water cooled including electrically heated water separator with fuel prefilter 24V Air pre-cleaner, precleans approx. 98% of abrasive smut. Automatic idle speed stop for diesel engine. Eco-mode for diesel engine

SENNEBOGEN MAXCAB – cab with sliding door

Heating- Climate automatic with central control elements

SENNEBOGEN control & diagnostic system SENCON

Counter rotation of ventilator for cleaning the cooler

Automatic central lubrication for equipment and slewing ring raceway

Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area

Camera system – base package with 2 cameras includes 1 colour monitor 7″, monitor with 4-way split, up to 4 cameras.
expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine.

Emergency control function to ensure machine availability for limited operations by bridging the main functions.

Wheeled undercarriage MP21E for diesel machines with 4-point-stabilizers, all-wheel-drive and two-stage powershift transmission.

Solid rubber tires, 10.00-20 (8 units) with intermediate ring

Wheel steering with adjustable steering column instead of joystick-steering for mobile machine

Cab elevation type E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics SENNEBOGEN MAXCAB operator’s cab with sliding door incl. sliding window, resiliently mounted, tinted safety glass, tiltable front window, skylight, wiper/washer system for front window, Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof.

Air suspended operator’s seat with support for intervertebral disc, seat heating and headrest for driver´s seat multi-functional armrest for driver’s seat (product Aguti Command) Ergonomically adjustable armrest, versatile adjustable for every situation and physique (height-adjustable, swiveling sidewise, angle-adjustable, armrest slidable) instead of standard armrest.

2-inch seat belt – standard

Windscreen wiper for lower cabin front window with washer system

Sun protection for skylight, only for MAXCAB

Sun protection for front windscreen, inside, only for MAXCAB

Radio with USB and SD port, MP3 and Bluetooth

Additional counterweight 1.5t mounted on existing counterweight Attention: Extended swing radius.

Standard lubricants for operation range between -20°C and +40°C, for diesel machines. Hydraulic oil Shell Tellus S2 VA 46

SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator.

Standard materials handling boom type K11 consisting of: straight compact boom 6.3m straight and grab handling stick 4.6m curved with special materials handling kinematics, boom and stick cylinders featuring end position damping. End position shut off for stick in function, safety check valves for boom and stick cylinder. Quick change couplers (bolted type) with counter pieces
for grab open/close and grab rotating. Boom damping system 821E – reduces boom swinging and absorbs energy.

1 LED headlight mounted on the cab roof heading backwards.
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side.
1 LED headlight mounted on the compact boom downside.
1 LED headlight mounted on the compact boom upper side.
1 LED headlight mounted on the cab roof heading forwards.

Standard North American Options not currently on the machine, contact us about adding.

GenSet
Under Carriage Protection
Top and Front Bullet Proof Glass
Top and Front Protection Guards
Cab Catwalk
Upper Carriage Handrails
Jump Start Connection
Travel Alarm
Boom out and stick out limitation.

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine.