This used 818 wheeled material handler is configured w/ a K9 ULM stick/boom combination, it has a reach of 30′ and weighs 48,000 lbs. It’s ULM stick is ideal for waste & recycling station duties.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industries largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE 

The machine is located in South Carolina. Contact us for a machine and freight quote.

CUMMINS Engine QSB 4.5 – C130, 97kW/2200 rpm, emissions according to US EPA Tier 4 final/EU stage IV, water-cooled including electrically heated water separator with fuel prefilter 24V

Air pre-cleaner, precleans approx. 98% of abrasive smut

Automatic idle speed stop for diesel engine

Eco-mode for diesel engine

SENNEBOGEN MAXCAB – cab with sliding door

Heating- Climate automatic with central control elements

SENNEBOGEN control & diagnostic system SENCON

Counter rotation of ventilator for cleaning the cooler

Automatic central lubrication for equipment and slewing ring raceway

Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 halogen lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area

Camera system – base package with 2 cameras includes 1 color monitor 7”, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine

Emergency control function to ensure machine availability for limited operations by bridging the main functions

Tool kit

Wheeled undercarriage MP21E for diesel machines with 4-point-stabilizers, all-wheel-drive and two-stage powershift transmission.

Solid rubber tires, 10.00-20 (8 units) with intermediate ring

Joystick-steering (only wheeled machines)

Cab elevation type E270 for SENNEBOGEN MAXCAB, infinitely adjustable up to 2.7m via hydraulics

SENNEBOGEN MAXCAB operator’s cab with sliding door, resiliently mounted, tinted safety glass, tiltable front window, skylight, wiper/washer system for front window, 2 halogen lights integrated in the front of the roof.

Air suspended operator’s seat with support for intervertebral disc, seat

2 inch seat belt

Sun protection for skylight

Sliding window in driver’s door for MAXCAB operator’s cab

Radio with USB and SD port, MP3 and Bluetooth

Standard lubricants for operation range between -20°C and +40°C, for diesel machines

Hydraulic oil Shell Tellus S2 VA 46

Compact boom 5.3m straight and grab handling stick 3.8m straight with ULM reversing mechanism. End position shut off for stick in function, safety check valves for boom and stick cylinders

Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating

Pressure indicator (boom cylinder) with Barograph display in the SENCON and acoustical warning, deactivation possible.

ULM hydraulics for bucket cylinder operation consisting of: standard hydraulics for operation of a grab with fixed oil quantity and oil pressure. Additional hydraulic valve and additional piping for operation of the bucket cylinder ULM, appropriate for attachments e.g. sorting grab

2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side

1 LED headlight mounted on the compact boom down side

North American options not currently on the machine, contact us about adding.

Genset
Upper carriage handrails
Under carriage protection
Cab Catwalk
Travel alarm
Top Guard
Bullet proof glass
Jump start connection

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine.