Sennebogen Certified Used Machines include: 12-Month/2,000 Hour Drivetrain & Hydraulic Warranty.

We are turning the Grey Market Green! When you purchase a used material handler from Sennebogen North America you are fully supported by the Manufacturer with 24/7 on-call Parts ordering with a 98% fill-rate from $55 million in parts inventory, and Free Training for your Service Techs at our Headquarters in North Carolina.

You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

This used 850M wheeled material handler weighs 140,000 pounds, has a reach of 69′, & features the MAXCAB Industrial with the 3.0m up and 2.6m out function, making it ideal for port terminals & scrap yards.

This machine is located in SC, contact us for a machine and freight quote.

CUMMINS Engine X12 298 kW / 1800rpm, Tier 4 final, water cooled, including electrically heated water separator with fuel prefilter 24V and pre-cleaner for air filter. Diesel particulate filter (DPF). Automatic idle speed stop for diesel engine. Eco-mode for diesel engine.

Standard materials handling boom type K21 consisting of: compact boom 12.1m straight and grab handling stick 9.5m curved with special materials handling kinematics, boom and stick cylinders featuring end position damping safety check valves for boom and stick cylinder.
End position shut off for boom up/down and stick in/out function. Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating. Floating position for equipment – lift of the boom while closing the grab.

Additional 1.5t integrated in counterweight + 1.7t on top of standard counterweight, increased counterweight height. Required for handling boom ex 20 meters. ATTENTION: only possible for 850 with mobile undercarriage

SENNEBOGEN MAXCAB Industry with sliding door incl. Sliding window and undivided, straight windscreen in bullet proof glass, fixed glazing. Roof extended to front, roof window in bullet proof glass, wiper/washer system for front window, lower front window with wiper/washer system, wiper for skylight, resiliently mounted, Radio in preparation with aerial and loudspeakers, 2 lights integrated in the front of the roof, automatic air condition with fresh air and circulation air filters. Air suspended operator’s seat with lumbar support, seat heating and headrest for driver´s seat. 2 inch seat belt – standard

Cab elevation type E300/260 for SENNEBOGEN MAXCAB, infinitely adjustable hydraulically, lifting up to approx. 3.0m and 2.6m to front.

Hand fire extinguisher, type PD6 (1 piece)

Sun protection for skylight, inside, only for MAXCAB industry

Sun protection for front windscreen, inside, only for MAXCAB industry

Grated step on side of cab with hand rail (bolted), only for MAXCAB

Hand rail at the upper structure, tiltable for transportation, diesel engine

SENNEBOGEN control & diagnostic system SENCON

Automatic counter rotation of ventilator for cleaning the cooler

Automatic pinion lubrication for slewing ring

Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage frame on the front side left and right, 2 rear lights and 2 lights integrated in the left front side of the cab roof. LED headlight with magnetic fixing support and 5m of cable for flexible connection in maintenance area

Camera system – base package with 2 cameras includes 1 color monitor 7”, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for rear view camera right side of the machine

Wheeled undercarriage MP50E for diesel machines with 4-point-stabilizers, all-wheel-drive via 2 hydraulic motors.

Solid rubber tires 14.00-24 (8 units) with intermediate ring for MP50E.

Individual control of the stabilizers (4-point) for MP50E. Each stabilizer leg with single function control.

Joystick-steering (only wheeled machines), MP50E, MP55E

outrigger pads 625×525 for MP42; MP50

Standard lubricants for operation range between -20°C and +40°C, for diesel machines Information: hydraulic oil type needs to be defined separately. Hydraulic oil Shell Tellus S2 VA 46

SENNEBOGEN Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil
purity and extended oil service life), equipment recommended especially when biodegradable oil is used.

Camera system – add-on camera (1 piece), variable positioning via magnetic base

1 LED headlight mounted on the cab roof heading backwards
2 LED headlights mounted on the stick: 1 pc on left side, 1 pc on right side
1 LED headlight mounted on the compact boom down side
1 LED headlight mounted on the compact boom upper side
1 LED headlight mounted on the cab roof heading forwards

Operations and maintenance manual in duplicate, in German or English language

Spare parts catalogue online available

SENtrack telematics system.

North American Specs not currently on the machine, contact us about adding.

25kW Generator
Top and front cab guards
Protection guard for hydraulic drive motors

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine.