SENNEBOGEN

2016 825 M K13 E-Series
2016 825 M K13 E-Series
  • Used
  • 2016
  • 13500
  • 57,000 lbs.
  • K13 - 43'4"
  • CUMMINS Engine QSB 6.7 - C173, 129kW/2000 rpm, Tier 3
  • 825.0.2360
  • Eye level up to 19′
  • Request a Price
DESCRIPTION

This used 825M wheeled material handler requires no DEF fluid, is configured w/ a K13 stick/boom combination, has a reach of 43’4″, & is equipped w/ a GEMA 15Kw Generator. It’s Tier 3 Cummins engine makes it an excellent option for Mexico and South America!

The Sennebogen 825 weighs in at 57,000 pounds, has a lift capacity up to 30,000 pounds, and reach up to 43 feet to efficiently move and sort scrap materials with ease. Explore its advanced hydraulics and innovative design that contribute to unmatched material handling capabilities. From ferrous to non-ferrous metals, this used material handler excels in handling a diverse range of scrap recycling materials.

When you purchase a used material handler from Sennebogen North America you are fully supported by the Factory with $55 million in parts inventory in North Carolina, 24/7 on-call Parts ordering, and even Free Training for your Service Techs at the Factory. You are also supported by the industry’s largest Dealer and Authorized Service Provider Network. You can check out all the Service options in your area HERE

The machine is located in Charleston, SC. Contact us for a machine and freight quote.

DETAILED SPECS

· CUMMINS Engine QSB 6.7 – C173, 129kW/2000 rpm, emissions according to US EPA Tier 3/EU stage IIIa, watercooled, automatic idle speed for diesel engine

· Hydro-Clean: Hydraulic micro filter system with water absorption contamination indicator (higher oil purity and extended oil service life)

· Lighting system 1: 2 pcs. H4 headlights mounted in the upper carriage-frame on the front side left and right, 2 rear lights and 2 halogen lights integrated in the left front side of the cab roof.”

· Heating- Climate automatic (air condition) with central control elements, outside air and circulating air stages, with particle filter, defrost circuit, adjustable air vents for optimum work environment.

· CUMMINS Engine QSB 6.7 – C173, 129kW/2200 rpm, emissions according to US EPA Tier 3/EU stage IIIa, water-cooled.

· GEMA 15Kw Generator

· Automatic central lubrication for equipment, slewing ring raceway

· Camera system – base package with 2 cameras: includes 1 color monitor 7”, monitor with 4-way split, up to 4 cameras expandable, 2 cameras with 115° field viewing angle for, rear view camera, right side of the machine.

· K13 7.5m Boom 7.5m, 5.8m stick.

· Safety check valves for boom cylinders. End position shut off for stick in function.

· eco-mode for diesel engine, automatic idle speed for diesel engine

· Radio with CD-Player

· Quick change couplers (bolted type) with counter pieces for grab open/close and grab rotating.

· Air filter pre-cleaner, precleans approx. 98% of abrasive smut (increased life span of air filter)

· SENNEBOGEN MAXCAB large capacity comfortable operator´s cab with sliding door, infinitely adjustable up to 2.7m via hydraulics

· Wheeled undercarriage MP26 with 4-point stabilizers, 40 t special axles and strong all-wheel-travel drive

· SENNEBOGEN diagnostic system

· Counter rotation of cooler ventilator to blow out cooler with automatic control.

· Solid rubber tires, 10.00-20 (8 units) with intermediate ring

· “Lighting system 3 equipment:

· 1 pc. headlight mounted on the compact boom downside and 2 pcs.

· headlights mounted on both sides of the stick in upper position (in addition

· to system 1 or 2)”

· Air suspended operator´s seat with support for intervertebral disc, seat

· heating, safety belt and headrest for driver´s seat”

· Sun protection for skylight

· Sliding window in driver´s door (ESG)

North American Specs not on the machine (contact us about adding):
• Top and front bullet proof glass
• Top and front guards
• Under carriage protection
• Travel alarm
• Upper carriage handrails
• Catwalk at cab
• Jumpstart connection
• Cab back light

Listed are the machine’s original specs from the factory, we can’t guarantee accuracy as it is a used machine.

AFTER-SALES SUPPORT

All of our Used machines receive the same level of after-sell support as our new machines.

Customer Direct

We work directly with you when it comes to selling our machines and providing after-sell support.  No other manufacturer gives you direct access

Minimize Downtime

Uptime is priority No. 1 at SENNEBOGEN and we have developed specialized programs and services to keep you up & running smoothly.

SERVICE NETWORK

SENNEBOGEN has built the industry’s largest network for factory-trained technicians, offering you more choices to ensure the best possible support for your SENNEBOGEN, throughout the life of the machine.

Uptime Kits

SENNEBOGEN is the only manufacturer on the market that has specific kits to provide quick resolution for minor issues that can cause a machine to go down

Preventive Maintenance Kits

Sennebogen has created an easy way to perform PM services on your machines.  Our PM kits have all the required parts needed in one simple box with part numbers listed. (Only excludes oils)

Parts Inventory

We have $50M in parts inventory in Stanley, NC with a 95% order fill-rate. When we run into a situation where we do not have a part in-stock we will air-freight it from Germany.

24-Hour “on call” parts service

We have a 24-hour “on call” parts service which you can call if a machine is down, and you need a part asap.  Our “on call” parts rep will arrange for a hotshot truck to arrive at our warehouse and ensure the part is in route asap.  (Call parts @ 704-347-4911).

Sennebogen Training

We offer you the same Factory Training as our ASPs and Dealers.  The Training is free, you just pay airfare, food, & hotel. We are the only manufacturer of material handlers that offers the same level of training we offer our ASPs & Dealers.

Request A Price OR More Details

Name